Download Stock Firmware Flash File for Oukitel WP17

 Download Stock Firmware Flash File for Oukitel WP17
 Download Stock Firmware Flash File for Oukitel WP17 Download Stock Firmware Flash File for Oukitel WP17

Official Stock Firmware/ Flash File Now available for the Oukitel WP17 & You can download it from below. by using this firmware you can solve all software Issues with in your Oukitel WP17 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Advertisement

Oukitel WP17 Run on Android 11 and it is Powered by Mediatek helio G95 Processor. it is a dual SIM Smartphone support Nano SIM cards, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 8GB of RAM and 128GB of storage that can be expandable via SD card.

Must Require:

see also

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Fix some serious issue in device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of board software

Pre-Requirement’s

  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oukitel WP17
Type: Full ROM
Size: up to 1.99GB
SoC: helio G95
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: ASW2100YJ_2201_T2046

Download Links:

How to Install Stock Firmware on Oukitel WP17:

    • Extract Downloaded firmware.
    • Install Mediatek VCOM driver on Your computer.
    • Download & extract smartphone Flash tools on your computer
    • from the flash tool folder Run flash_tool.exe

Download Stock Firmware Flash File for Blackview BL5000 5G

      • Go to Download tab Click Scatter and load scatter file from ROM folder

Download Stock Firmware Flash File for Blackview BL5000 5G

      • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

Download Stock Firmware Flash File for Blackview BL5000 5G

      • flashing Process Started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Be the first to comment

Leave a Reply

Your email address will not be published.


*